01. Corrosion and Scale Inhibition (WP1) |
|
Corrosion resistance of austenitic and duplex stainless steels in chloride containing alkaline environments
H. Peltola, M. Martikainen, M. Lindgren, Outotec Research Center, Pori/FIN
|
|
Combination of stearic acid and benzotriazole as corrosion inhibitors for Cu and Cu40Zn in artifical urban rain
G. Zerjav, I. Milosev, Jozef Stefan Institute, Ljubljana/SLO
|
|
Conversion coatings of lanthanide salts on aluminium alloy as a potential replacement of chromate coatings
B. Volaric, I. Milosev, Jozef Stefan Institute, Ljubljana/SLO
|
|
Green corrosion inhibition from aqueous extract of Zygophyllum album L for carbon steel in hydrochloric acid medium
H. Derfouf Talbi, Bechar University/DZ; Y. Harek, Abou Bakr Belkaid, Tlemcen/DZ
|
|
Novel cationic surfactant based on triazole as a corrosion inhibitor for carbon steel in phosphoric acid produced by dihydrated wet process
M.A. Hegazy, Egyptian Petroleum Research Institute (EPRI), Cairo/ET
|
|
Effect of Zr on intergranular corrosion of low Cr ferritic stainless steel
J.H. Park, K.Y. Kim, Pohang University of Science and Technology/ROK
|
|
Effect of temperature on the corrosion inhibition of heat exchangers made by 316L stainless steels using sodium molybdate in LiBr solutions
S. Zolfaghari, Islamic Azad University - Najaf Abad Branch, Ahvaz/IR; A. Ashrafi, A. Saatchi, Isfahan University of Technology/IR; A. Rabiei Baboukani, Islamic Azad University - Najaf Abad Branch, Isfahan/IR
|
|
Corrosion protection of the modern absorption chillers in geothermal heat exchangers using molybdate inhibitors
S. Zolfaghari, Islamic Azad University - Najaf Abad Branch, Ahvaz/IR; A. Ashrafi, A. Saatchi, Isfahan University of Technology/IR; A. Rabiei Baboukani, Islamic Azad University - Najaf Abad Branch, Isfahan/IR
|
|
Corrosion inhibition of steel boiler by use of three amino alcohols
A. Merati, M.A. Bellouchrani, S. Mokdad, Polytechnic Military School, Algiers/DZ
|
|
Orange peel as green corrosion inhibitor - assessment of hesperidin, naringin and synephrine efficiecy
M.V.C. Monteiro, J.C. Rocha, J.A.C. Ponciano Gomes, Federal University of Rio de Janeiro/BR
|
|
Influence of the lithium molibdate inhibitor on the corrosion resistance of a duplex stainless steel in LiBr absorption machine
M.J. Muñoz-Portero, J. Rubio-Cervera, R. Leiva-García, J. García-Antón, Universidad Politecnica de Valencia/E
|
|
2HEABu corrosion-inhibitor action in aggressive medium on API X70 substrate
M.R. Ortega Vega, S.R. Kunst, Universidade Federal do Rio Grande do Sul, Porto Alegre/BR; S. Mattedi, M. Iglesias, Universidade Federal da Bahia, Salvador/BR; C.F. Malfatti, Universidade Federal do Rio Grande do Sul, Porto Alegre/BR
|
|
Inhibition efficiency of 3,4-diaminobenzonitrile against steel corrosion
G. Sigircik, T. Tüken, M. Erbil, Çukurova University, Adana/TR
|
|
Electrochemical study of the inhibitive effect a new prepared quinoline derivative on the corrosion of steel in 3.5% NaCl solution
N. Hassan, City of Scientific Research and Technology Applications, Alexandria/ET; N.A. Abdelghany, National Research Center, Cairo/ET; R.M. El-Shishtawy, King Abdulaziz University, Jeddah/SAR; S. Khalil, Alexandria University/ET
|
|
Rosmarinus officinalis use as eco-friendly corrosion inhibitor carbon steel in acid solution
M.A. Velázquez-González, J.G. Gozález-Rodríguez, M.G. Valladares-Cisneros, Universidad Autónoma del Estado de Morelos/MEX
|
|
The effect of chloride concentration on copper protection
N. Kicir, T. Tüken, M. Erbil, Çukurova University, Adana/TR
|
|
Three novel bolaamphiphiles as corrosion inhibitors for carbon steel in hydrochloric acid: experimental and computational study
M.A. Hegazy, Egyptian Petroleum Research Institute (EPRI), Cairo/ET; M.K. Awad, Tanta University/ET
|
|
Environmentally friendly carboxylate inhibitors for heating and cooling (HVAC) systems
M. Ahmed, The Manchester University/UK
|
|
Corrosion inhibition of ground anchors steel in HCl by H2S-scavenger in HCI solution
J. Malina, University of Zagreb, Sisak/HR; F. Kapor, University of Zagreb, Zagreb/HR; A. Begic Hadzipasic, University of Zagreb, Sisak/HR
|
|
Adsorption and passivation of copper in neutral solutions by some heterocyclic corrosion inhibitors
M.O. Agafonkina, Y.I. Kuznetsov, N.P. Andreeva, Institute of Physical Chemistry and Electrochemistry RAS, Moscow/RUS
|
|  |
02. Corrosion by Hot Gases and Combustion Products (WP 3) |
|
Investigation of oxidation and corrosion of welding lines in austenitic stainless steel AISI321 in critical oxidizing conditions
S. Soltani, R. Ebrahimi, Islamic Azad University - Najaf Abad Branch, Isfahan/IR
|
|
Effect of the presence of water vapour on the high temperature oxidation of Co-10Ni-30Cr and Co-10Ni-30Cr-0.5C alloys
A. Leroy, A. Navet, Lycée Henri Loritz, Nancy/F; Th. Schweitzer, L. Aranda, P. Berthod, University of Lorraine, Vandoeuvre-lès-Nancy/F
|
|
Kinetic of oxidation at 1000, 1100 and 1200°C of 32.5wt.% Cr-containing Co-based alloys reinforced by hafnium carbides
E. Conrath, P. Berthod, University of Lorraine, Vandoeuvre-lès-Nancy/F
|
|
Kinetic of oxidation of chromium-rich HfC-containing Co-based and Ni-based alloys between 1000 and 1100°C
E. Conrath, P. Berthod, University of Lorraine, Vandoeuvre-lès-Nancy/F
|
|
Effect of sulfur on the KCl-induced high temperature corrosion of selected Fe-based and Ni-based alloys
S. Kiamehr, K.V. Dahl, TU of Denmark, Lyngby/DK; T. Jonsson, Chalmers University of Technology, Göteborg/S; M. Montgomery, M.A.J. Somers, TU of Denmark, Lyngby/DK
|
|
Carbide transformations occurring between 1000 and 1100°C in the sub-surface of a Ni-25Cr-0.50C alloy induced by hot oxidation
P. Berthod, E. Conrath, University of Lorraine, Vandoeuvre-lès-Nancy/F
|
| |
03. Nuclear Corrosion (WP 4) |
|
Investigation of the effect of water chemistry and temperature on the oxide layer formed on Alloy 182 in simulated PWR environment
R. de Mendonca, R.-W. Bosch, W. van Renterghem, SCK, CEN (Belgian Nuclear Research Centre), Mol/B
|
|
Corrosion monitoring of NPP equipment and pipelines by high-temperature on-line sensors
M. Sofin, F.V. Nikolaev, V.G. Kritsky, P.S. Styazhkin, VNIPIET Corp. "ROSATOM", St. Petersburg/RUS
|
|
On the mechanism and kinetics of radiation induced corrosion of copper
Å. Björkbacka, S. Hosseinpour, M. Johnsson, C. Leygraf, M. Jonsson, KTH Royal Institute of Technology, Stockholm/S
|
|
Corrosion susceptibility of steel drums containing cemented simulated incineration ashes as low level nuclear waste
G. Duffó, S. Farina, Comisión Nacional de Energía Atómica, Buenos Aires/RA; F. Schulz, CONICET, Buenos Aires/RA; F. Marotta, Politecnico de Milano/I
|
|
Corrosion of high purity copper as engineering barrier in deep geological repositories
M. Ochoa, M. Rodríguez, S. Farina, Comisión Nacional de Energía Atómica, Buenos Aires/RA
|
|
Hydrogen production by iron corrosion under irradiation
D. Stammose, M. Osmond, E. Barker, C. Wittebroodt, Institut de Radioprotection et de Sûreté Nucléaire, Fontenay aux Roses/F
|
|
Effect of cathodic hydrogen charging of titanium alloys on hydrogen absorption and hydride formation
S. Dejardin, V. Dusquenes, N. Creton, R. Oltra, T. Montesin, Université de Bourgogne, Dijon/F
|
|
Water chemistry and corrosion issues of control rod and protection system in Russian LWGRS
E. Yurmanov, V. Yurmanov, OJSC NIKIET, Moscow/RUS
|
|
Sensitisation and IGSCC in type 321 SS NPP manifold welds
K. Shutko, JSC NIKIET, Moscow/RUS
|
|
Behaviour of steam generator tube at different temperatures and levels of chloride
M. Schvartzman, F. Mansur, P. Nogueira, W.R.C Campos, M.A.D. Quinan, Centro de Desenvolvimento da Tecnologia Nuclear, Belo Horizonte/BR
|
|
Oxidation behavior and spallation of oxide scales after T91 oxidation in water vapor environment
M. Demizieux, C. Desgranges, CEA Saclay, Gif-sur-Yvette/F; J. Favergeon, Université Technologique de Compiègne/F; L. Martinelli, CEA Saclay, Gif-sur-Yvette/F
|
|
Corrosion resistance in multipass welding of thick UNS S31304 lean duplex stainless steel plates welded using SMAW, GMAW and FCAW processes
C.S. Souza, V.F.C. Lins, D.M. Silveira, C.G.F. Costa, R.C. Junior, F.R. Campos, A.Q. Bracarense, Federal University of Minas Gerais, Belo Horizonte/BR
|
| |
05. Corrosion Mechanisms, Methods and Modelling (WP 6 & 8) |
|
Corrosion resistance of cold worked CrNi and CrNiMnN metastable austenites in defined strain states
P. Seemann, WITg, Tägerwilen/CH; P. Gümpel, HTWG Konstanz/D
|
|
Study of the influence of the different percentages of sigma phase in the resistance to pitting corrosion of a duplex stainless steel
C. Berlanga, Universidad Pública de Navarra, Pamplona/E; G. Argandoña, Cemitec, Pamplona/E; M.V. Biezma, Universidad de Cantabria, Santander/E; P. Linhardt, Vienna University of Technology/A
|
|
Application of ENM to investigate the effect of different materials and methods of preparation of coating on anticorrosion quality of ZRP
B. Eremias, L. Mindos, L. Turek, SVUOM Ltd., Prague/CZ; L. Hochmannova, SYNPO Inc., Pardubice/CZ
|
|
Corrosion studies by depth profiling techniques
C. Olivero, P. Chapon, A. Tempez, S. Legendre, Horiba Jobin-Yvon SAS, Longjumeau/F
|
|
Influence of surface treatments on localized corrosion behaviour of welded AISI 316L stainless steel
M. Halamová, University of Zilina/SK; G. Fumagalli, Politecnico di Milano/I; T. Liptáková, University of Zilina/SK; F. Bolzoni, Politecnico di Milano/I
|
|
Comparitive corrosion resistance of dimensionally stable titanium based anodes and conventional lead alloy anodes in copper electrowinning
H. Potgieter, Manchester Metropolitan University/UK
|
|
Scanning vibrating electrode technique as a tool for investigating corrosion activities on coated mild steel in NaCl solutions
W. Shi, S.B. Lyon, The University of Manchester/UK
|
|
Qualification of stress and test methods for use in combined fatigue algorithms for riveted joints
J. Gehrke, Institut für Korrosionsschutz Dresden GmbH/D
|
|
Pitting potential of materials during potentiodynamic polarization in a NaCl Solution
Y. Yi, M. Al Ameri, Khalifa University, Abu Dhabi/UAE; S. Al Saadi, FANR, Abu Dhabi/UAE; P. Cho, Khalifa University, Abu Dhabi/UAE; C. Jang, KAIST, Daejeon/ROK
|
|
Corrosion modelling of Ti-20Zr in body environment conditions
J. Mirza Rosca, V. Bolaños, University of Las Palmas de Gran Canaria/E; C. Vasilescu, S. Drob, Institute of Physical-Chemistry of Romanian Academy, Bucharest/RO
|
|
Pasivation of different Ti-Ta alloys by EIS
J. Mirza Rosca, E. Rodriguez Galindo, V. Bolaños, University of Las Palmas de Gran Canaria/E; S. Drob, C. Vasilescu, Institute of Physical-Chemistry of Romanian Academy, Bucharest/RO
|
|
Effect of microstructure of X-65 in bioethanol for pipelines
M. Lucio, J.G. González Rodríguez, S. Serna, A. Torres-Islas, Universidad Autónoma del Estado de Morelos, Cuernavaca/MEX
|
|
Corrosion resistance of Zr 2.5Nb as material for permanent implants
S. Farina, Comision Nacional de Energía Atómica, Buenos Aires/RA; A. Gomez Sanchez, S. Ceré, CONICET, Mar del Plata/RA
|
|
Comparative corrosion behaviour of different Sn-based solder alloys
S. Farina, Comision Nacional de Energía Atómica, Buenos Aires/RA; C. Morando, IFIMAT-UNCPBA, Tandil/RA
|
|
Miniaturized cell for localized electrochemical measurements. Concept and examples of application
M. Bestetti, A. Vicenzo, S. Franz, M.F. Brunella, G. Puricelli, Politecnico di Milano/I; C. Borioli, Nanomaterials.it Srl, Milano/I
|
|
Dew-point corrosion resistance of alloys in geothermal fluids containing acid chloride
M. Cabrini, S. Lorenzi, T. Pastore, Università di Bergamo/I; M. Favilla, R. Perini, B. Tarquini, Enel GP, Larderello/I
|
|
Corrosion resistance of ternary Ni-Ti alloys in 0.9% NaCl solution
C.D.R. Barros, J.A.C. Ponciano Gomes, Federal University of Rio de Janeiro/BR
|
|
Electrochemical induced dissolution of silver points in sodium fluoride solution
C. Amaral, F. Ormiga, J.A.C. Ponciano Gomes, Federal University of Rio de Janeiro/BR
|
|
EIS Studies of As-cast monotectic Al-Pb and Al-Bi alloys in a 0.5 M NaCl solution
E. Freitas, University of Campinas/BR; W. Osório, University of Campinas, Limeira/BR; A. Silva, Federal University of Pará, Belém/BR; J. Spinelli, Federal University of São Carlos/BR; A. Garcia, University of Campinas/BR
|
|
Study on corrosion behavior of carbon steel pipeline in saline soil
H. Liu, E. Sosa, Mexican Institute of Petroleum, Mexico/MEX
|
|
Corrosion behavior of stainless steel alloys in phosphoric acid
I.M. Ghayad, Central Metallurgical Research and Development Institute, Cairo/ET; A.S. Ahmed, R.M. Abou Shahba, E.M. Attia, W.A.M. Hussein, Al Azhar University, Cairo/ET
|
|
Effect of thermal treatments on the localized corrosion behaviour of alloy 718
R. Rebak, GE Global Research, Schenectady, NY/USA; M. Rincon Ortiz, The University of Akron, OH/USA; M. Iannuzzi, GE Oil and Gas, Sandvika/N; M. Kappes, M. Rodriguez, Instituto Sabato, Buenos Aires/RA
|
|
Repassivation mechanism of Al alloys
D. Cicolin, E. Melilli, M. Pogliana, D. Guastaferro, M. Trueba, S.P. Trasatti, Università degli Studi di Milano/I
|
|
The modified phosphate conversion coating on Zn-Mg alloy coated steel for corrosion protection
Y.J. Kwak, T.Y. Kim, D.Y. Lee, K.H. Nam, Y.H. Jung, W.S. Jung, M.J. Eom, S.J. Hong, POSCO, Gwangyang/ROK; J.K. Min, H.K. Sohn, POMIA, Pohang/ROK
|
|
Application of micro-indentation techniques for investigation of seasonal corrosivity of Black Sea maritime atmosphere
O.V. Startsev, I.M. Medvedev, All-Russian Scientific-Research Institute of Aviation Materials, Gelendzhik/RUS
|
|
Design criteria of reliability and safety in the design of corrosion protection of structural steel
V. Korolov, Priazovsky State Technical University, Mariupol/UA; Y.B. Vysotskyy, Donetsk National Technical University/UA; Y.V. Filatov, PrSC «Donetsksteel» - Metallurgical Plant»/UA; A.N. Gibalenko, OJSC «V.Shimanovsky UkrRDISteelconstruction», Makeyevka/UA
|
|
Electrochemical induced dissolution of silver points in sodium fluoride solution
C. Amaral, F. Ormiga, J.A.C. Ponciano Gomes, Federal University of Rio de Janeiro/BR
|
|
Corrosion resistance of ternary Ni-Ti alloys in 0.9% NaCl solution
C.D.R. Barros, J.A.C. Ponciano Gomes, Federal University of Rio de Janeiro/BR
|
|
Tensile testing of exposed steel, with sensors of acoustic emission
D. Marusáková, P. Sajdl, J. Polácková, J. Petru, Institute of Chemical Technology Prague/CZ
|
|
Thermogravimetric study of hydrogen uptake and desorption in titanium alloys
V. Duquesnes, N. Creton, T. Montesin, Université de Bourgogne, Dijon/F; E. Deloye, Vallourec Heat Exchanger Tubes, Venarey-les-Laumes/F
|
|
Corrosion behavior of 18Cr-18Mn hot forging steel
A. Torres, R. Reyes, S. Serna, Universidad Autonoma del Estado de Morelos, Cuernavaca/MEX; A. Bedolla, Universidad Michoacana de San Nicolas de Hidalgo, Morelia/MEX; M.A. Lucio, J. Colin, Universidad Autonoma del Estado de Morelos, Cuernavaca/MEX
|
|
Evaluation of the pitting corrosion on an AISI 304 using scanning electrochemical microscopy
R. Sánchez-Tovar, R. Fernández-Domene, J. García-Antón, Universidad Politecnica de Valencia/E
|
|
Influence of submarine emissions from El Hierro volcano (Spain) on the corrosion resistance of stainless steels
R. Fernández-Domene, R. Sánchez-Tovar, C. Escrivà-Cerdán, R. Leiva-García, J. García-Antón, Universidad Politecnica de Valencia/E
|
|
Data processing and data mining applied to electrochemical noise technique for stress corrosion cracking recognition
L. Bonaccorsi, L. Calabrese, University of Messina/I; D. Di Pietro, GE Oil & Gas, Firenze/I; M. Galeano, E. Proverbio, University of Messina/I
|
|
FEM analysis of H-trapping diffusion model in pipeline steels
E. Fallahmohammadi, F. Bolzoni, G. Fumagalli, G. Re, L. Lazzari, Politecnico di Milano/I
|
|
Sustainable water and facility management in the steel industry: influence of saline streams on pipeline corrosion
D. de la Fuente, M. Morcillo, National Centre for Metallurgical Research, Madrid/E; P. Ivashechkin, VDEh-Betriebsforschungsinstitut, Düsseldorf/D; V. Colla, T.A. Branca, Scuola Superiore Sant'Anna, Pisa/I; M. De Sanctis, Pisa University/I; B.P. Vivas, M. Cabanas, ArcelorMittal Espana, Aviles/E; A. Rassow, Outokumpu Nirosta GmbH, Düsseldorf/D; C. Lucca, ILVA S.p.A., Taranto/I
|
|
Investigating the effective parameters on simulation of stress corrosion cracking (SCC)
S. Hooshmand Zaferani, Pars Oil and Gas Company (POGC), Tehran/IR; H. Aldaghi, M. Samadzadeh, S. Easapour, Pars Oil and Gas Company (POGC), Asalouyeh/IR
|
|
Corrosion behavior of tungsten heavy alloys in different aqueous solutions
Z. Abdel Hamid, Central Metallurgical R&D Institute (CMRDI), Helwan/ET
|
|
Si-based membrane protection against KOH etching
Y. Liu, L. Dong, J. Li, C. Zhao, Chinese Academy of Sciences, Beijing/CHN
|
|
Influence of intermetallic phase content and microstructure on pitting potential of a duplex stainless steel
D.C. Dos Santos, R. Magnabosco, FEI, São Bernardo do Campo/BR
|
|
Evaluation of elemental sulfur role on brittle failure in sour brine environment
M. Anselmi, GE Oil & Gas, Florence/I; L. Bonaccorsi, L. Calabrese, University of Messina/I; F. Cappuccini, GE Oil & Gas, Florence/I; A. Caprì, University of Messina/I; A. Donato, GE Oil & Gas, Florence/I; E. Proverbio, University of Messina/I
|
|
Quantum chemical study of adsorption of organic inhibitors of corrosion of Al on Al2O3 and Al(OH)3 surfaces
G. Beloglazov, University of Dodoma (UDOM)/EAT; S. Beloglazov, Baltic Federal University, Kaliningrad/RUS
|
|
The evaluation of soil corrosion based on electrochemical and physical-chemical parameters
A. Bueno, Federal University of São João Del Rei/BR; J. Ponciano, Federal University of Rio de Janeiro/BR
|
|
Corrosion performance of TiO2 nanostructures synthesized at low voltage applying electrochemical techniques
H. Herrera-Gutiérrez, C. Cuevas Arteaga, Universidad Autónoma del Estado de Morelos, Cuernavaca/MEX; E. del Ángel Meraz, Universidad Juárez de Tabasco/MEX
|
|
Corrosion repair of duplex stainless steel control valves in man-made river project in Libya
S. Bakhet, Man Made River Authority, Benghazi/LAR; S.M. Elekoum, Tripoli University, Benghazi/LAR
|
|
Effect of pre-corrosion on efficiency of film-forming corrosion inhibitors in 4M hydrochloric acid under turbulent flow conditios
E. Barmatov, T. Hughes, Schlumberger Gould Research, Cambridge/UK
|
|
Magnetic field effect on the inhibition of aluminum and iron corrosion with surfactants in acidic solution
N. Al-Rawashdeh, A. Rosan, I. Sryheen, Jordan University of Science & Technology, Irbid/JOR
|
|
A probabilistic model for localized corrosion on a metallic pipe under D.C. stray current influence
G. Lucca, SIRTI S.p.A., Milano/I
|
|
The kinetic during atmospheric corrosion of a nickel cathode
S. Wibihal, CEST GmbH, Wiener Neustadt/A
|
|
Hlfabar as effective environmentally friendly corrosion
inhibitor for zinc metal in different aqueous solutions
O. Abdullatef, Pharos University, Alexandria/ET; B. Abd-El-Naby, Alexandria University/ET
|
|
Nanoscale oxide growth on nickel studied by reactive molecular dynamics
O. Assowe, L. Van Brutzel, A. Chartier, CEA de Saclay, Gif-sur-Yvette/F
|
| |
07. Marine Corrosion (WP 9) |
|
Study on copper release from an antifouling coating and its influence on corrosion of aluminum alloy substrate
J. Cao, Naval Coatings Analysis and Test Center, Beijing/CHN; J. Sun, Y. Tang, Y. Zuo, Beijing University of Chemical Technology/CHN
|
|
Behaviour of anti-corrosion coatings: comparison of the ageing in real environment in 2 different exposition sites
M. Tejero, J.B. Jorcin, Tecnalia R&I, Donostia - San Sebastián/E; A. Prieto, T. Alhambra, J. Ferreiro, Hempel R&D, Polinya/E
|
|
Study of the influence of the nature of sulfuric anodizing bath on the characteristics of the oxide layer obtained on aluminum alloy AU4G
S. Benamirouche, L. Kebabsa, L. Hemmouche, Military Polytechnic School, Algiers/DZ; M.A. Belouchrani, Office of Research and Development-Staff / ANP, Algiers/DZ
|
|
Corrosion resistance in multipass welding of thick UNS S31304 lean duplex stainless steel plates welded using SMAW, GMAW and FCAW processes
D.M. Silveira, UFSJ, Ouro Branco/BR; V.F.C. Lins, A.Q. Bracarense, C.S. Souza, R. Cardoso Junior, Federal University of Minas Gerais, Belo Horizonte/BR
|
| |
08. Microbial Corrosion (WP 10) |
|
Sulfate-reducing bacteria induced the corrosion of copper
D. Zhang, S. Chen, P. Wang, Chinese Academy of Sciences, Qingdao/CHN
|
|
Effect of electromagnetic field on the corrosion behaviour of 2205 duplex stainless steel in the presence of Pseudoalteromonas sp.
Z. Song, M. Moradi, Ningbo Institute of Materials Technology and Engineering/CHN
|
|
Influence of biofilm with mixed culture in corrosion rate of carbon steel
S.H. Oliveira, M.R.S. Vieira, D.R. Lima Junior, M.A.G.A. Lima, S.L. Urtiga Filho, Federal University of Pernambuco, Recife/BR
|
|
The effects of Ag-Cu ions on the microbial corrosion of 316L stainless steel in the presence of Desulfovibrio sp.
T. Unsal, S. Arkan, E. Ilhan-Sungur, Istanbul University/TR; N. Cansever, Yildiz Technical University, Istanbul/TR
|
| |
09. Corrosion of Steel in Concrete (WP 11) |
|
Production of IRACOR steel for improving materials durability: resistance to corrosion atmosphere for industrial applications
S. Pourmostadam, Mobarakeh Steel Company, Isfahan/IR
|
|
Study the effect of heat and LASER treatments on the corrosion behavior of microalloyed carbon steels
F.M. Sayed, M.H. Hegazy, G.M. El-Mahdy, Helwan University, Cairo/ET; M.M. Essia, A.M. Fathy, Central Metallurgical Research & Development Institute (CMRDI), Cairo/ET
|
|
Improving durability of reinforced concrete structures using migrating corrosion inhibitors
B. Bavarian, L. Reiner, California State University, Northridge, CA/USA
|
|
Adsorption and inhibition corrosion of the biopolymer on carbon steel in simulated pores concrete solution
M. Martins, Federal Institute of Alagoas, Maceió/BR; J. Tonholo, S.B.B. Uchoa, Universidade Federal de Alagoas, Maceió/BR
|
|
FTIR study on the amorphous corrosion products of galvanized steel in carbonated concrete
G. Roventi, T. Bellezze, C. Conti, R. Fratesi, Polytechnic University of Marche, Ancona/I
|
|
Adsorption and inhibition corrosion of the biopolymer on carbon steel in simulated pores concrete solution
M. Martins, IFAL-Federal Institute of Alagoas, Maceió/BR; J. Tonholo, S.B.B. Uchoa, Universidade Federal de Alagoas, Maceió/BR
|
|
Characterization and processing digital series obtained from electrochemical monitoring of reinforcing steel
R. Camacho-Chab, Instituto Tecnologico de Campeche/MEX; T. Pérez, Universidad Autónoma de Campeche/MEX; B. Escobar-Morales, Instituto Tecnológico de Cancún/MEX
|
|
Corrosion resistance of several metallic materials
in contact with mortar
G. Duffó, S. Farina, Comisión Nacional de Energía Atómica, Buenos Aires/RA; F. Schulz, CONICET, Buenos Aires/RA
|
| |
10. Corrosion in Oil & Gas Production (WP 13) |
|
Corrosion mitigation and inspection strategy for protection of assets in oil production facilities: an experience of Nafoora oilfield
I. Ahmad, Arabian Gulf Oil Company, Benghazi/LAR
|
|
The influence of temperature on corrosion behavior of chromium steels in CO2-contaning environments
I.Yu. Pyshmintsev, I.V. Kostitsyna, V.P. Parshukov, RosNITI, Chelyabinsk/RUS; A.G. Tyurin, Chelyabinsk State University/RUS
|
|
Hydrogen induced cracking of austenitic-ferritic stainless steels SAF 2205 and SAF 2507
S. Silva, J.A.C.P. Gomes, Federal University of Rio de Janeiro/BR
|
|
The combined effect of H2S and CO2 corrosion on API 5L X52 steel in 3.5 wt% sodium chloride solution
M. Khodaparast, M. Javidi, Shiraz University/IR
|
|
New system for corrosion protection of large enclosures
E. Lyublinski, Y. Vaks, Northern Technologies International Corporation, Beachwood, OH/USA; R. Singh, E. Tanade, ZERUST, Sorocaba/BR
|
|
Corrosion process of API 5L X52 in production water from oil well
O. Olivares-Xometl, Benemérita Universidad Autónoma de Puebla/MEX; M. Mónica Corrales-Luna, Instituto Politécnico Nacional, Distrito Federal/MEX; N.V. Likhanova, Instituto Mexicano del Petróleo, Distrito Federal/MEX; J.M Hallen, I.V. Lijanova, Instituto Politécnico Nacional, Distrito Federal/MEX
|
|
A study by in situ Raman spectroscopy of carbon steel corrosion in CO2 and H2S environment
O. Delpoux, J. Kittel, F. Grosjean, IFP Energies Nouvelles, Solaize/F; S. Joiret, CNRS, Paris/F; N. Desamais, C. Taravel-Condat, Technip, Le Trait/F
|
|
Corrosion resistance of rolled and rerolled supermartensitic steel in media containing chlorides and hydrogen sulfide
R. Braga Soares, D.C. de Sousa Garcia, M. Mendonça Lima, M.M. Reis de Castro, V. de Freitas Cunha Lins, University of Minas Gerais, Belo Horizonte/BR
|
|
Improvement of 9% nickel steel for CO2 reinjection in FSPOS and its corrosion resistance in brazilian pré-salt conditions - SSC and HIC
R. Kalume, Vallourec Tubos do Brasil, Belo Horizonte/BR; L.I.L. Lima, Vallourec Tubos do Brasil, Rio de Janeiro/BR; M.C. Ferreira, Vallourec Tubos do Brasil, Belo Horizonte/BR; B.I. Palmieri, G.V. Silva, C.R. D'Ávila, Petrobras S.A., Rio de Janeiro/BR; J.A. Carreno Velasco, R.V. Landim, S.M. de Souza, Instituto Nacional de Tecnologia, Rio de Janeiro/BR
|
|
Effect of AC frequency on stress corrosion cracking behavior of X80 pipeline steel in carbonate/bicarbonate solution
C. Du, M. Zhu, X. Li, Z. Liu, University of Science and Technology Beijing/CHN
|
|
The influence of heat treatment on the corrosion behaviour of Inconel 718
L.C.M. Valle, UFRJ and Petrobras, Rio de Janeiro/BR; A.I.C. Santana, UEZO, Rio de Janeiro/BR; L.H. de Almeida, O.R. Mattos, UFRJ, Rio de Janeiro/BR
|
|
Failure analysis and fitness-for-service assessment for a storage tank with hydrogen blisters
E. Khayer, Iranian Offshore Oil Company, Shahreza/IR; E. Shekari, Memorial University of Newfounland/CDN
|
|
Pipeline integrity management plan against corrosion failures - evaluation of pipeline corrosion mechanisms
A. Bueno, Federal University of São João Del Rei/BR; J. Ponciano, Federal University of Rio de Janeiro/BR
|
|
Assessment of localized corrosion resistance of 13Cr, 15Cr and 17Cr stainless steels in high chloride and CO2 environments
E. Senatore, J.A.C.P. Gomes, Federal University of Rio de Janeiro/BR
|
| |
11.1. Metallic Coatings |
|
Corrosion protection property of corrosion products of zinc galvanized steels
H. Katayama, National Institute for Materials Science, Tsukuba/J; R. Miyahara, Y. Hoshi, I. Shitanda, M. Itagaki, Tokyo University of Science, Noda/J
|
|
Deposition of zinc powder on iron with cold spray application
A. Bossio, T. Monetta, C. Bitondo, F. Bellucci, Università degli Studi di Napoli Federico II/I
|
|
Thin film hot dip galvanizing - the innovative revival of a traditional process
T. Pinger, J. Tomaszewski, Fontaine Technologie GmbH, Gelsenkirchen/D
|
|
The electrochemical behavior of NiTi in different simulated body fluids
A.R.S. Witt, L.M. Antonini, Z.L. Wislocki, J. Castelan, C.F. Malfatti, Federal University of Rio Grande do Sul, Porto Alegre/BR
|
|
Influence of deposition techniques on properties of solar selective coatings on Cu and Al substrates
M. Shoeib, CMRDI, Cairo/ET; N. El-Mahallawy, Ain Shams University, Cairo/ET; Y. Ali, The German University in Cairo/ET
|
|
Electrochemical behaviour of protective coatings in chloride solutions
G. Sundararajan, GE Global Research, Bangalore/IND; R. Rebak, GE Global Research, Schenectady, NY/USA
|
|
Electrodeposition of Ni-Mo-P electrodes for direct alcohol fuel cell applications
Z. Abdel Hamid, Central Metallurgical R&D Institute (CMRDI), Helwan/ET
|
|
Characterizing the structure of ZnAlMg-coated steel sheet via FIB-tomography
M. Arndt, J. Duchoslav, Universität Linz/A; C.K. Riener, G. Angeli, voestalpine Stahl GmbH, Linz/A; D. Stifter, Universität Linz/A
|
|
An electrodeposition process for fabrication of super-hydrophobic nickel film and its corrosion resistance
S. Khorsand, K. Raeissi, F. Ashrafizadeh, Isfahan University of Technology/IR; M.A. Arenas, National Center for Metallurgical Research, Madrid/E
|
|
The effect of texture and surface morphology on the corrosion resistance of zinc electrodeposits
S. Khorsand, K. Raeissi, M.A. Golozar, Isfahan University of Technology/IR
|
|
Performance of multilayered thermal spray coating using conventional and nanoscale Tungsten carbide cobalt deposited on carbon steel
S. Mutairi, Saudi Aramco Oil Company, Dhahran/SAR; J. Stokes, M.S.J. Hashmi, Dublin City University/IRL; B.S. Yilbas, KFUPM, Dhahran/SAR
|
|
Investigate anticorrosion and fatigue strength of AISI 4340 steel aluminum coated by IVD processes
W. Shifeng, Y. Xin, L. Lei, S. Yafeng, Northwestern Polytechnical University, Xi'an/CHN
|
|
Anodic oxidation of galvanic Zn-Ni alloy coatings in the NaOH solutions
A. Maciej, W. Simka, Silesian University of Technology, Gliwice/PL; J. Michalska, Silesian University of Technology, Katowice/PL; T. Gorewoda, Institute of Non Ferrous Metals, Gliwice/PL; G. Dercz, University of Silesia, Chorzów/PL
|
|
Nano-dispersion phase components - ratio influence on
Cr-SiO2-C nano-composition coatings corrosion resistance
G. Yar-Mukhamedova, G. Ismailova, A. Markhabaeva, L. Zhanayeva, Al-Farabi National University, Almaty/KZ
|
|
Recommendations for chrome based corrosion-resistant nano-composition coatings application
G. Yar-Mukhamedova, K. Khoshimova, Al-Farabi National University, Almaty/KZ
|
|
Pd-In and Pd-Fe as new type of "Ni-free" top coatings for decorative applications
S. Caporali, P. Marcantelli, U. Bardi, Università di Firenze, Florence/I
|
| |
11.2. Inorganic Coatings |
|
Effect of PTFE and Al2O3 particles variation on corrosion and wear behavior of NiP-PTFE-Al2O3 nanodispersion coatings
A. Singh, P. Ankita, I.I.T. Roorkee, Saharanpur/IND
|
|
Investigation of possibility to use glass-based layer to prevent internal corrosion of pipelines
M. Ronceray, A. Barnett, K.A. Raheem, Wood Group Kenny Ltd., Staines-upon-Thames/UK
|
|
Bioceramic coatings on Ti6Al4V, developed by electrochemical plasma, laser printer with localized stripping and deposition electrophoresis
D. Peña, Universidad Industrial de Santander, Bucaramanga/CO; L. Ramos, H. Estupiñan, Unalmed, Medellin/CO
|
|
Elaboration of silica hybrid coatings for corrosion protection of carbon steel: electrochemical study
T. Phan, C. Jama, Ecole Nationale Supérieure de Chimie de Lille, Villeneuve d'Ascq/F
|
|
The influence of PEG concentration to increase the barrier effect of a silane protective coating against the corrosion of galvanized steel
T.L. Menezes, H.R.P. Cardoso, S.Q. Kunst, M.R.O. Vega, C.F. Malfatti, J. Zoppas-Ferreira, Universidade Federal do Rio Grande do Sul, Porto Alegre/BR
|
|
Influence of aluminium alloy type on the corrosion behaviour of formed alumina films
C. Girginov, S. Kozhukharov, University of Chemical Technology and Metallurgy, Sofia/BG
|
|
Corrosion behavior of nanostructured bioactive apatite coating on TiVAl alloys
A. Alshamsi, United Arab Emirates University, Al-Ain/UAE
|
|
Microstructure and optical appearance of anodized friction stir processed Al- metal oxide surface composites
V. Gudla, F. Jensen, K. Bordo, S. Canulescu, R. Ambat, TU of Denmark, Kongens Lyngby/DK; A. Simar, Université Catholique de Louvain/B; R. Shabadi, Université Lille 1, Villeneuve `Ascq/F
|
|
Hybrid films modified with polyethylene glycol for corrosion protection of tin plate
H. Ribeiro Piaggio Cardoso, S. Raquel Kunst, M.R. Ortega Vega, T. Lemos Menezes, C. Fraga Malfatti, Universidade Federal do Rio Grande do Sul, Porto Alegre/BR
|
|
Electrochemical characterization of a H2F6Zr film formed on SAE 1006 steel
J. Dos Anjos Moraes, Universidade Federal do Rio Grande do Sul, Porto Alegre/BR; R. Sánchez-Tovar, R. Leiva-García, J. García-Antón, Universidad Politecnica de Valencia/E; J. Zoppas-Ferreira, Universidade Federal do Rio Grande do Sul, Porto Alegre/BR
|
|
Characterization of conversion layers hexavalent chromium free applied in electrogalvanized steel
K. Provazi de Souza, C.R. Tomachuk, L.E.M. Palomino, Universidade de São Paulo/BR; C. M. Reis, Universidade Federal de São Paulo, Diadema/BR; I. Costa, Universidade de São Paulo/BR
|
|
Corrosion resistance of economical environmentally friendly anodization for Mg-3Zn-0.8Ca alloy
M. Shoeib, H. Soliman, S. Mikhail, M.E. Mousa, CMRDI, Cairo/ET
|
|
Corrosion protection properties of the yttria stabilized sol-gel ZrO2 thin film on 316L stainless steel
I. Bacic, Forensic Science Centre Ivan Vucetic, Zagreb/HR; H. Otmacic Curkovic, L. Curkovic, University of Zagreb/HR
|
|
Optical appearance of AC anodized Al/TiO2 composite coatings
K. Bordo, V. Gudla, R. Ambat, TU of Denmark, Lyngby/DK; F. Jensen, Bang & Olufsen, Struer/DK
|
|
Superficial patina: analytical interpretation of the ancient process of realization of Japanese Shakudo alloy
D. Ferro, CNR-ISMN, Rome/I; D. Servidio, Sapienza University, Rome/I; B. De Filippo, CNR, Rome/I; D. Loepp, Sapienza University, Rome/I
|
|
RE modified orthophosphoric - sulphuric acid anodic oxidation process and properties of film
Y.B. Huang, Z.Y. Yi, D.G. Liu, T.H. Lu, Academy of Armored Forces Engineering, Beijing/CHN
|
|
Effect of primer-free helical inserts to prevent galvanic corrosion
A.E. Eken, C. Yilmaz, E. Tan, ASELSAN AS, Ankara/TR
|
|
Corrosion resistance of H2F6Zr coatings in NaCl
J. Dos Anjos Moraes, Universidade Federal do Rio Grande do Sul, Porto Alegre/BR; R. Sánchez-Tovar, R. Leiva-García, J. García-Antón, Universidad Politecnica de Valencia/E; J. Zoppas-Ferreira, Universidade Federal do Rio Grande do Sul, Porto Alegre/BR
|
|
Advanced environmentally friendly chemical surface treatments for cast magnesium helicopter transmission alloys preservation
F. Brusciotti, U. Izagirre Etxeberria, A. Unzurrunzaga Iturbe, TECNALIA Research & Innovation, Donostia-San Sebastian/E
|
| |
11.3. Organic Coatings |
|
Delamination of organic coatings on a zinc substrate
investigated with a current measurement method
S. Wibihal, M. Pichler, CEST GmbH, Wiener Neustadt/A; G. Fafilek, Vienna University of Technology/A; M. Fleischanderl, voestalpine Stahl Linz GmbH/A
|
|
New flange corrosion protection system
K. Flanagan, Belzona Polymerics Limited, Harrogate/UK
|
|
It's all relative, when it comes to protective coatings
D. Ferguson, Infracorr Pty. Ltd., Melbourne/AUS; P. Dove, GHD Pty. Ltd., Melbourne/AUS
|
|
The study on failure process of acrylic polyurethane coating under alternate wetting and drying condition
Z. Fang, Naval Academy of Armament, Beijing/CHN; L. Zhang, X. Zhao, Y. Zuo, Beijing University of Chemical Techonolgy/CHN
|
|
Improved corrosion protection of graphene oxide reinforced siloxane-PMMA hybrid coatings
S.V. Harb, F.C. dos Santos, S.H. Pulcinelli, C.V. Santilli, P. Hammer, Universidade Estadual Paulista (UNESP), Araraquara/BR
|
|
Anodic protection produced by Smart Ink
R.S. Silva, V. Maggi, J.Z. Ferreira, A. Meneguzzi, UFRGS, Porto Alegre/BR
|
|
Protective compositions on base of wastes of vegetable oils production against atmospheric corrosion of steel goods
V.I. Vigdorovich, RRITOP, Tambov/RUS; A.A. Uryadnikov, Derzhavin State University, Tambov/RUS; N.V. Shel, Tambov State Technical University/RUS; L.E. Tsygankova, Derzhavin State University, Tambov/RUS
|
|
Performance of three organic coatings through degradation by atmospheric corrosion chamber
J.A. Ortiz Valera, A.E. Ortiz Valera, V.H. Jacobo Armendariz, A. Ortiz Prado, National University of Mexico/MEX
|
|
Fine textured polymer based composite materials as multifunctional low friction coatings with corrosion protection
D. Bentz, S. Schmitz-Stöwe, M. Wild, C. Becker-Willinger, INM - Leibniz-Institute for New Materials gGmbH, Saarbrücken/D
|
|
In-situ AFM investigation of waterborne acrylic coating with CeO2 nanoparticles for corrosion protection of carbon steel
L. Jing, P. Jinshan, KTH Royal Institute of Technology, Stockholm/S
|
|
The effects of the nano-TiO2 on the interfacial corrosion behavior of immersed coatings
J. Gao, H. Jiang, H. Qian, L. Lu, X. Li, University of Science and Technology Beijing/CHN
|
|
Study of the corrosion behavior of electrogalvanised steel/Cr(III) and Zr conversion layer/paint system by electrochemical and visual methods
F.M. Queiroz, CCTM, São Paulo/BR; P.R. Seré, C.I. Elsner, A.R. Di Sarli, CIDEPINT, La Plata/RA; C.R. Tomachuk, Universidade de São Paulo/BR; I. Costa, CCTM, São Paulo/BR
|
|
Research into the causal effects and development of solutions to pinholing of powder coated galvanized steel
A. Speakman, C. Chisholm, M. El-Sharif, R. Ansell, Glasgow Caledonian University/UK
|
|
Behaviour of coatings at the defect - scribing tools for investigations of coatings on steel
R. Bentfeld, Institut für Korrosionsschutz Dresden GmbH/D
|
|
Accelerated corrosion tests to evaluate an epoxy paint prepared with a load resin of Aloe vera
E. Del Angel Meraz, Universidad Juárez Autónoma de Tabasco/MEX; C. Cuevas Arteaga, Universidad Autónoma del Estado de Morelos/MEX; D. Frias Márquez, Universidad Juárez Autónoma de Tabasco/MEX
|
|
Raman spectroscopy as a tool for investigation of fluoropolymer coatings on electronic boards
M. Rodosek, L. Slemenik Perse, M. Mihelcic, M. Kozelj, B. Orel, National Institute of Chemistry, Ljubljana/SLO; B. Bengu, O. Sunetci, Arcelik R&D, Istanbul/TR; P. Pori, Chemcolor Sevnica/SLO; A. Surca Vuk, National Institute of Chemistry, Ljubljana/SLO
|
| |
11.4. Pretreatments |
|
Influence of different pretreatments of Mg4Y2Nd prior to NaF-coating on the electrochemical corrosion behaviour
C. Schille, E. Schweizer, J. Geis-Gerstorfer, University Hospital of Tuebingen/D
|
|
Mechanism of electrochemical corrosion of silane sol-gel film as pretreatment for LY12 Al-alloy covered by silicone-epoxy hybrid coating
X. Yuan, Z.F. Yue, S.F. Wen, L. Li, Northwestern Politechnical University, Xi'an/CHN
|
|
Establishment of a novel CV-method to measure real work pieces and comparison with the standard method
A. Schindel, J. Schodl, CEST Centre of Electrochemical Surface Technology, Wiener Neustadt/A; G. Fafilek, TU Vienna/A; Ch. Kleber, CEST Centre of Electrochemical Surface Technology, Wiener Neustadt/A
|
|
Employing electro-deposition technique for coating nano-bioactive ceramic coating on dental Ti-alloy implant
M. Shoeib, CMRDI, Cairo/ET; H. Shalaby, Beni-Suef University/ET; M. Nassif, Ain Shams University, Cairo/ET; A. Abdelrahman, MTI University, Cairo/ET
|
|
Improved corrosion resistance of electrogalvanized steel by a surface treatment with cerium, organic additive and niobium compound
J.M. Ferreira Jr., J.L. Rossi, L.G. Martinez, IPEN/CNEN, São Paulo/BR; S. Hinder, M. Baker, University of Surrey, Guildford/UK; I. Costa, IPEN/CNEN, São Paulo/BR
|
|
Passivation of mild steel by trialkoxysilanes
A. Semiletov, Yu.I. Kuznetsov, A.A. Chirkunov, Russian Academy of Sciences, Moscow/RUS
|
| |
11.5. Self-healing Coatings |
|
Fundamental investigation on the mechanism of capsule based redox-responsive self-healing coatings
A. Vimalanandan, Max-Planck-Institut für Eisenforschung GmbH, Duesseldorf/D; L.-P. Lv, Max-Planck-Insitut für Polymerforschung, Mainz/D; T. H. Tran, Max-Planck-Institut für Eisenforschung GmbH, Duesseldorf/D; K. Landfester, D. Crespy, Max-Planck-Insitut für Polymerforschung, Mainz/D; M. Rohwerder, Max-Planck-Institut für Eisenforschung GmbH, Duesseldorf/D
|
|
Encapsulation of corrosion inhibitors in a self-healing polymeric coating
H. Verbruggen, A. Lutz, H. Terryn, I. De Graeve, Vrije Universiteit Brussel, Elsene/B
|
|
"Green" encapsulation of corrosion inhibitors for smart coatings
A. Altin, M. Rohwerder, A. Erbe, Max-Planck-Institut für Eisenforschung GmbH, Düsseldorf/D
|
|
Self-healing properties of smart coating for hot dip galvanized steel
W.J. Li, C.Y. Tsai, C.J. Lu, Industrial Technology Research Institute, Hsinchu/RC
|
| |
11.6. Coatings for High Temperatures (WP 3 & 14) |
|
Development of Fe-Cr-Al sputter coatings to resist high temperature chloride environments at 550°C
D. Orlicka, N.J. Simms, T. Hussain, J.R. Nicholls, Cranfield University/UK
|
|
Effect of pH electrolyte on alumina based coating produced via electrolyte plasma method
S. Sohrabi, Azad University of Najaf Abad, Isfahan/IR; A. Saatchi, Isfahan University of Technology/IR; R. Ebrahimi, Azad University of Najaf Abad, Isfahan/IR
|
|
Wavelet transform electrochemical noise analysis for intermetallic coatings at 750 °C in molten salt environment
A. Garcia, Universidad de Sonora/MEX; E.F. Díaz, S. Serna, J. Colin, A. Torres-Islas, M.A. Lucio-Garcia, Universidad Autónoma del Estado de Morelos, Cuernavaca/MEX
|
|
Oxidation resistance ferritic stainless steel AISI 430 coated with spinel based Fe doped Ni-Co
A. Bervian, G.A. Ludwig, M.A. Korb, C.F. Malfatti, Federal University of Rio Grande do Sul, Porto Alegre/BR
|
|
Development of Fe doped Ni-Co spinel for use in SOFC interconnects
A. Bervian, G.A. Ludwig, M.A. Korb, C.F. Malfatti, University Federal of Rio Grande do Sul, Porto Alegre/BR
|
|
Influence of CaO and CeO2 coatings on the oxidation of nickel polycrystals
Z. Halem, Bouira University/DZ; N. Halem, Tizi-Ouzou University/DZ; S. Chekroude, Constantine Univerity/DZ; M. Abrudeanu, Pitesti University/RO; G. Petot-Ervas, Ecole Centrale des Mines, Paris/F
|
|
The effect of the a double coating layer-oxide phase (NiFe2O4) combined with perovskite phase (La0,6Sr0,4CoO3) on a ferritic stainless steel
D.A.S. Lima, G.A. Ludwig, M.A. Korb, A. Bervian, C.F. Malfatti, I. L. Müller, Federal University of Rio Grande do Sul, Porto Alegre/BR
|
|
Effect of chemical regimes on oxide layers of materials in power engineering
J. Polackova, P. Sajdl, J. Petru, D. Marusakova, Institute of Chemical Technology Prague/CZ
|
| |
12. Corrosion in the Refinery Industry (WP 15) |
|
Corrosion resistance of austenitic steels used in biodiesel fuel plant
A.P. Pereira, Fiat Automobile S.A., Betim/BR; V.F.C. Lins, M.M.R. Castro, Federal University of Minas Gerais, Belo Horizonte/BR; C.E.A.S. Torres, Petrobras Biofuel, Montes Claros/BR
|
|
Failure analysis of a caustic tank
A. Al-Sahli, A. Al-Meshari, S. Funani, Saudi Basic Industry Corp. (SABIC), Jubail/SAR
|
|
Corrosion of steels used in a biodiesel fuel plant
A.P. Pereira, Fiat Automobile S.A., Betim/BR; V.F.C. Lins, C.G.F. Costa, M.M.R. Castro, C.E.A.S. Torres, Federal University of Minas Gerais, Belo Horizonte/BR
|
|
Evaluation of mechanical properties and corrosion behavior in welded joint of API 5L X80 steel
B. Silva, D.R. Lima Junior, M.R.S. Vieira, S.L. Urtiga Filho, Federal University of Pernambuco, Recife/BR
|
|
Comparative assessment of the corrosion resistance of CRA alloys in H2S/chloride environments
V. Moura de Souza, J.A.C. Ponciano, Federal University of Rio de Janeiro/BR; R. Yuan, Petrobras, Rio de Janeiro/BR
|
|
Evaluation of the degree of sensitization influence in the passive film
J. Costa, Federal University of São João Del Rei/BR; J.R Oliveira, Centre for Research and Development Leopoldo Américo Miguez de Mello, Rio de Janeiro/BR; J.A.C.P. Gomes, Federal University of Rio de Janeiro/BR; A.H.S. Bueno, Federal University of São João Del Rei/BR
|
|
in situ AFM and FTIR spectroscopy coupled with electrochemical techniques studies on naphthenic corrosion of API 5L X70 steel
E.C. Rios, A.L. Oliveira, A.M. Zimer, R.G. Freitas, R. Matos, L.H. Mascaro, E.C. Pereira, UFSCar, São Carlos/BR
|
| |
13. Cathodic Protection (WP 16) |
|
Impressed current cathodic protection (ICCP) Ti-MMO grid system for 61m diameter methanol tank
F. Al-Fawaz, Saudi Basic Industries Cooperation-SABIC, Jubail Industrial City/SAR
|
|
EPIC new 16" Jet A1 fuel pipeline (external coating case study)
N. Hamdy, PETROJET, Cairo/ET
|
| |
15. Automotive Corrosion (WP 17) |
|
Effect of Sn on the electrochemical corrosion behavior of Pb-Ca grid and influence on lead-acid battery performance
A. Turhan, S. Yilmaz, S. Aksoy, B. Yildiz, Inci Aku San. Ve Tic. A.S, Manisa/TR
|
| |
16. Corrosion of Polymer Materials (WP 19) |
|
Three dimensional orientations by FTIR- and polarized light microscopy
S. Damodaran, T. Schuster, K. Rode, R. Brüll, Fraunhofer Institute for Structural Durability and System Reliability LBF, Darmstadt/D
|
|
Imaging techniques: tool for the quantification of oriented additives
T. Schuster, K. Rode, S. Damodaran, R. Brüll, Fraunhofer Institute for Structural Durability and System Reliability LBF, Darmstadt/D
|
| |
17. Corrosion & Corrosion Protection of Drinking Water Systems (WP 20) |
|
Failure analyses of localised corrosion damages on stainless steels - practical examples
I. Juraga, V. Alar, V. Simunovic, I. Stojanovic, University of Zagreb/HR
|
|
Investigations of the corrosion behaviour of stainless steel in contact with ECA-generated disinfectant fluids
M. Dimper, A. Ahrens, S. Reimann, BAM - Federal Institute of Material Research and Testing, Berlin/D
|
|
Biocorrosion evolution in a laboratory copper pipe ageing system
D. Fischer, L. Daille, C. Galarce, R. De la Iglesia, G. Pizarro, I. Vargas, Pontificia Universidad Católica de Chile, Santiago/RCH
|
|
In-plant corrosion investigation on steels in distillery effluents
A. Singh, C. Sharma, C. Ram, I.I.T. Roorkee, Saharanpur/IND
|
|
Failure analysis of firewater pipeline
S. Al Subai, K. Barai, M. Esteban, Saudi Basic Industries Corporation (SABIC), Jubail/SAR
|
| |
18. Corrosion of Archaeological and Historical Artefacts (WP 21) |
|
Corrosion of cans in collections: the case study of Burghalde
museum
L. Brambilla, Haute Ecole Arc Conservation-restauration, Neuchâtel/CH; S. Mischler, EPFL, Lausanne/CH; L. Nicolay, R. Schmitt, HES-SO, Sion/CH; C. von Arx, I. Böhmler, Burghalde Museum, Lenzburg/CH; R. Bertholon, Haute Ecole Arc Conservation-restauration, Neuchâtel/CH
|
|
Pollutant permeability in acrylate varnishes
J. Svadlena, J. Stoulil, Institute of Chemical Technology, Prague/CZ
|
| |
19. Corrosion in Aerospace (WP 22) |
|
Accelerated corrosion of copper in the presence of molten oxides
V.V. Belousov, A.A. Klimashin, Russian Academy of Sciences, Moscow/RUS
|
|
Accelerated corrosion of copper in the presence of molten oxides
V.V. Belousov, A.A. Klimashin, Russian Academy of Sciences, Moscow/RUS
|
|
Characterization of corrosion resistance of chromium-free coatings for aeronautical application
L. Belsanti, CNR-ISMAR, Genoa/I; E. Forchin, Agusta Westland, Varese/I; R. Stifanese, M. Toselli, P. Traverso, CNR-ISMAR, Genoa/I
|
|
Corrosion resistance and structural characteristics of aluminium alloys used for aeroplane parts
V.S. Sinyavskiy, All-Russian Institute of Light Alloys, Moscow/RUS
|
|
Study of the corrosion behaviour of friction stir welded aluminium alloys using global and local electrochemical techniques
C. Molena de Assis, H. Gomes de Melo, I. Vieira Aoki, University of São Paulo/BR; V. Vivier, Université Pierre et Marie Curie, Paris/F
|
|
A study of the films formed on an AA2024 alloy clad layer by hydrothermal treatments involving cerium (III) and propylene glycol
W.I.A. Santos, V.R. Capelossi, IPEN/CNEN, São Paulo/BR; S. Hinder, M.A. Baker, R. Grilli, University of Surrey, Guildford/UK; I. Costa, IPEN/CNEN, São Paulo/BR
|
|
Anticorrosion sol-gel coatings for anodised aluminium
M. Oubaha, Dublin Institute of Technology/IRL
|
| |
B. WS: Corrosion Reliability of Electronics Devices |
|
Climatic durability of modern assembly technologies in electronics
P. Zák, Czech Technical University, Prague/CZ; K. Kreislová, SVÚOM Ltd., Prague/CZ; D. Majtás, UTAM, Telc/CZ
|
|
Development and evaluation of atmospheric corrosion sensors using printed circuits
E. Roblero, F. Corvo, V. Moo-Yam, E. García-Ochoa, T. Pérez, Universidad Autónoma de Campeche/MEX
|
|
Understanding moisture protection of coated electronic circuits in terms of water permeation and electrochemical corrosion
J. Krog, Grundfos A/S, Bjerringbro/DK; M. Ahmed, M.S. Jellesen, TU of Denmark, Lyngby/DK; J.B. Jacobsen, Grundfos A/S, Bjerringbro/DK; R. Ambat, TU of Denmark, Lyngby/DK
|
| |
I. JS: Interplay of Mechanics and Corrosion in Surface and Bulk Degradation (WP 8 & 15) |
|
Tribocorrosion behavior of commercially pure titanium in biomedical application of dental and orthopaedic implants
Y. Yang, P. Ponthiaux, Ecole Centrale Paris, Chatenay-Malabry/F
|
| |
K. WS: Means of Prevention and Recovery against Decay/Deterioration of Valuable Building and Urban Decoration |
|
Anticorrosive properties study of metallic coatings and paint systems exposed to the sea water
M.R.S. Vieira, S.H. Oliveira, M.A.G.A. Lima, F.P. De França, S.L. Urtiga Filho, Federal University of Pernambuco, Recife/BR
|
| |
|
